TIG (Tungsten Inert Gas) welding, also known as GTAW (Gas Tungsten Arc Welding), is a process that uses a non-consumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by an inert shielding gas (argon or helium), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it.
TIG welding is most commonly used to weld thin sections of stainless steel and non-ferrous metals such as aluminum, magnesium, and copper alloys. The process grants the operator greater control over the weld than competing processes such as shielded metal arc welding and gas metal arc welding, allowing for stronger, higher quality welds. However, TIG is comparatively more complex and difficult to master, and furthermore, it is significantly slower than most other welding techniques.
What is TIG Welding Services
What is TIG Welding Services
If you’re looking for TIG welding services, you might want to consider factors such as the experience of the welder, the materials to be welded, the complexity of the project, and the equipment used. It’s also important to ensure that the service provider adheres to safety standards and regulations.

How do I choose the right filler metal for TIG welding?

Choosing the right filler metal for TIG welding involves considering several factors:
Match Your Metals: Your filler choice can boost or hinder your weld’s crack resistance, corrosion resistance, color matching, tensile strength, and ductility. The filler rod must match the base metal in terms of composition and welding requirements.
Industry Relevant Regulations: Even if a filler is advantageous to your weld, it might not be good enough to meet specific industry requirements.
Consider Post-Weld Results: Think about what you want the final weld to look like and how it needs to perform.
What is TIG Welding Services
What is TIG Welding Services
Base Material: The base material to be welded, the welding position, regulatory specifications and codes, design requirements, shielding gas, post-weld heat treatment, and welding equipment are all key factors to consider.
Welding Process: The type of welding process available and the type of welding joint and applicable welding stresses also influence the selection.
Service Conditions: The metallurgy of the material, its physical, and chemical properties, and service conditions (e.g., room temperature, elevated temperature, deep-sea, etc.) are also important.
Anticipated Cost and Quality Requirements: The anticipated cost and quality requirements should also be taken into account.

What are some common filler metals used in TIG welding?

There are several types of filler rods commonly used in TIG welding:
Mild Steel TIG Welding Rods: These are easy to use and relatively inexpensive compared to other materials.
Stainless Steel TIG Welding Rods: These are used for welding stainless steel.
Low Alloy Steel TIG Welding Rods: These are used for welding low alloy steels.
What is TIG Welding Services
What is TIG Welding Services
Copper Alloy TIG Welding Rods: These are used for welding copper alloys.
Aluminum TIG Welding Rods: These are used for welding aluminum. Some of the most commonly used alloys for TIG welding aluminum are 4043, 4047, 4943, and 5356.
Titanium TIG Welding Rods: These are used for welding titanium.

How do I prepare my metal for TIG welding?

Preparing metal for TIG welding involves both mechanical and chemical cleaning processes:
Mechanical Cleaning: This is the first step in preparing metal for TIG welding. You need to physically remove surface contaminants. Tools you can use for mechanical cleaning include wire brushes, angle grinders, sanders, and bench grinders. Each tool has its place, depending on the surface condition and the size and shape of the stock.
Chemical Cleaning: After mechanical cleaning, you need to use solvents and acids to remove paint, oil, grease, and aluminum oxide. This process ensures that the metal is clean and ready for welding.
Remember, only clean, shiny metal will take a strong bead from TIG. Dirty, rusted, oily, or otherwise contaminated metal won’t hold a weld. Therefore, it’s crucial to thoroughly clean the metal before TIG welding.

TECVINA – SUPPORTING INDUSTRIES

TIG welding services use a pointed tungsten electrode that creates an intense arc. This allows for great accuracy that is much needed for high-quality precision welding. TIG welding process (also known as GTAW or Gas Tungsten Arc Welding) uses a non-consumable tungsten electrode, meaning that it melts the base metal (the electrode itself does not melt).

Hotline: 0966500694

Email: tecvinamec@gmail.com

Location: Lot 02, Thuy Van Industrial Zone, Thuy Van ward, Viettri city, Phutho province, Vietnam

Để lại một bình luận

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Hotline: +84 966 500 694 tecvinamec@gmail.com zalo Zalo: 0966 500 694
Suport 24/7